AURO 250 Gloss Paint
AURO 250 Gloss is suitable for internal or external use on wood or metal. Available in white or a range of naturally tinted premixed colours.
AURO 250 Gloss is suitable for internal or external use on wood or metal. Available in white or a range of naturally tinted premixed colours. Unlike acrylics, Auro solvent free gloss paint are not prone to cracking and peeling. The exterior gloss system is expected to last 3 - 5 years when properly applied. They are both tough and flexible, but because no volatile solvents or chemical hardeners are used, drying times are dependent on temperature and humidity to a greater extent than with conventional paints. Dust dry in 6 – 9 hours, re-coatable after 24 hours. Final hardness reached in about 3 days.
Thoroughly prepare and prime wood or metal surfaces. Then apply at least two paint coats. Stir well, do not apply too thick. Tools can be cleaned with water and AURO Plant soap no 411, or with AURO Thinner no. 191.
In order to achieve a uniform surface, roll in horizontal direction first, then vertically. The colour tones of the paint can be freely mixed among each other. See our colour chart for numerous colour tone examples.
|Available Sizes||Approx. coverage m2|
Coverage quoted is approx. this may vary due to application or absrobtion from the substrate etc.; figures are for total area one coat would cover.
- Linseed oil
- Mineral pigments
- Colophony glycerol ester with organic acids
- Mineral fillers
- Surfactants made of rapeseed - castor oil
- Drying agents (cobalt-free)
- Castor oil
- Sunflower oil