AURO 342 High-Grade Lime Filler

AURO 342 High-Grade Lime Filler

AURO 329 Multi Filler

AURO 329 Multi Filler

AURO 342 High-Grade Lime Filler

This product comes in powder form for self-mixing with water. The High-grade lime filler levels surfaces with uneven absorbency, e.g. gypsum plasterboard, prior to the coating with High-grade lime paints.

£31.98
In stock
SKU
342

This product comes in powder form for self-mixing with water. The High-grade lime filler levels surfaces with uneven absorbency, e.g. gypsum plasterboard, prior to the coating with High-grade lime paints. It is suited for repairing small defects as well as for surface levelling. The product can be tinted with AURO Lime tinting base no. 350. It can also be compressed with a smoothing trowel, Venetian shape, to produce glassy wall surfaces, similar to the Moroccan Tadelakt.

Max application thickness: 3mm

Application

Intersperse 3 kg of High-grade lime filler in 1,75 l of water, stir in lump-free and let soak for 2-5 minutes. Stir again and apply within 8 hours working time. Maximum layer thickness is 3 mm.

Tips

The prepared Lime filler can be tinted with AURO Lime tinting base no. 350. Before overcoating with AURO lime products, the Lime filler must be fully carbonated and dried. This takes 24 hours for each mm of coat thickness.

Available sizes   Approx. coverage
3kg   8m2
20kg   55m2

Coverage is based on being applied at 0.5mm thickness.

Coverage quoted is approx. this may vary due to application or absorption from the substrate etc.; figures are for total area one coat would cover.